#223 double parameter extraction for generic resistor devices Issue created by d-m-bailey In magic 8.3.328

.subckt sky130_fd_sc_hd__conb_1 LO HI   VGND VPWR
R0 HI VPWR sky130_fd_pr__res_generic_po w=480000u l=45000u
R1 VGND LO sky130_fd_pr__res_generic_po w=480000u l=45000u
.ends

In magic 8.3.368 (2

w

parameters)

.subckt TG_sky130_fd_sc_hd__conb_1 HI LO VPWR VGND
R0 HI VPWR sky130_fd_pr__res_generic_po w=0.48 w=0.045
R1 VGND LO sky130_fd_pr__res_generic_po w=0.48 w=0.045
.ends

The

ext

files have the following differences in the device lines that might be relevant

< device devres sky130_fd_pr__res_generic_po 159 232 160 233 9 96 "a_159_232#" 0 0 "VGND" 96 0 "LO" 96 0
< device devres sky130_fd_pr__res_generic_po 21 232 22 233 9 96 "a_21_232#" 0 0 "HI" 96 0 "VPWR" 96 0
---
> device devres sky130_fd_pr__res_generic_po 159 232 160 233 9 96 "a_159_232#" 0 0 "VGND" 96 20256,614 "LO" 96 27072,756
> device devres sky130_fd_pr__res_generic_po 21 232 22 233 9 96 "a_21_232#" 0 0 "HI" 96 20256,614 "VPWR" 96 27072,756

RTimothyEdwards/magic