Here are the current extra BE check results for gf180mcu-0. 31 designs with no errors detected!

Great Job @Mitch Bailey

If frame-slot correspondence in manifest is incorrect then where can we found them? At least project-frame is valid, I assume.

@Paweł Sitarz The slot-project correspondence is correct. For the correct frame-slot/project correspondence, please see the chart in the link above.

Thanks!

@Mitch Bailey Thanks for the analysis! I'm the author of Slot-030 project, and unfortunately efuse_array VSS/VDD pins seem to be unconnected indeed. Shame on me. efuse_array.v file was not provided cause efuse_array module was done in analog design. I could provide a spice netlist, but such check will be kinda useless without power in this module.

@Egor Lukyanchenko Thanks for verifying the results. We want to make sure that the new LVS capability will work with mixed signal designs, so the

efuse_array.spice

file would be very helpful!

Hi @Mitch Bailey are the entries in the table indexed by slot number for finding. cause my entry in manifest is E6, 032 and I cant find it on the github table

@Abdul Moiz Sheikh The gf180mcu manifest frame - slot correspondence is incorrect. Check the table here. E6 should be slot 30.