And we reach Finals - Sky130 Tapeout Workshop - Physical Verification Hi There, So proud to say we completed the whole series of Specifications to GDS workshops and finally we reached the end, where we hand-off our designs to foundry after some checks. In industry, it's called "Physical Verification". This is the most demanding workshop from an industry standpoint. There are so many chip tape outs happening all over the world and there's a scarcity of Physical Verification engineers in the whole industry. This workshop exclusively fills up this gap. “*Physical Verification using Skywater 130nm technology*” Workshop intends to address various issues that come up during the design cycle as DRC/LVS violations. It aims to demonstrate the best approach to mitigate and rectify these violations. The course covers Physical Verification methodology using Magic,Netgen and OpenLane flow. It also explores the SKY130 PDK in detail, the knowledge of which is necessary to generate a robust design. This course starts with giving the basic idea of the design flow, PDK libraries and then takes a deep dive into the intricate concepts of Physical Verification with dedicated lectures and labs for each topic. Instructor Timothy Edwards, is SVP at Efabless.Analog VLSI designer and collecting and developing open-source EDA tools for over 27 years . He has worked for the Johns Hopkins Applied Physics Lab, startups MultiGiG and Analog Devices.Developed open-source EDA software tools such as Magic, Qflow, Netgen, and Xcircuit. Below link has registration details- https://www.vlsisystemdesign.com/physical-verification-using-sky130/ All the best and happy learning