My project cleared all prechecks.. I also submitted it before deadline.. still my project is showing tapeout as N/A while some projects have passed while some has failed.. How do I know my project will be selected or not.. so that I will rerun my design in MPW8..

Usually there’s a manifest in https://foss-eda-tools.googlesource.com/third_party/shuttle/sky130/mpw-007/foundry but the repo’s empty. You can check each of the 40 slots to see if your design was selected here https://foss-eda-tools.googlesource.com/third_party/shuttle/sky130/mpw-007/

That seems like the one for MPW7. For GFMPW0 the preliminary selection looks like https://foss-eda-tools.googlesource.com/third_party/shuttle/gf180mcu/mpw-000/foundry/+/refs/heads/main/manifest-gfmpw-0.csv. But some of those projects have failed precheck and/or tapeout, so either they are trying to fix them or will replace them with others.

Should we be getting some message regarding the result of the submission to GF MPW0?

@htamas Thanks for catching that. You are correct. I assumed that since the OP was going to rerun in mpw-8, that they were referring to mpw-7, but this is the gf180mcu channel.