open-source-silicon.dev

Hi, how can read the GPIO config of my Caravel board? I flashed some config with <https://github.com/efabless/caravel_board/tree/main/firmware/mpw2-5/gpio_config|gpio_test> and I would like to see if is everything right.
For ex. I would like to see something like:
`IO[0] - USER OUT`
`IO[1] - USER IN`
`...`

<@U029ET9938D> I don’t think there’s a way to directly verify the gpio settings at the gpio itself from the actual silicon.

<@U016EM8L91B> Is that correct?

Yes, that's right.  There is no loop-back from the end of the serial chain back to the processor, and no mechanism to latch the configuration values back into the serial chain.

If you will tell me your user project ID I will try to read them off the oasis file.

<@U06FKCF4E5T> I think <@U029ET9938D> changed the gpio config with the `gpio_test` program and wanted to check that his changes were what he was hoping for.

What is Linen?