Hi, I try to make an analog circuit(very simple inverter) for OpenMPW GF-1. I have flattened inverter but I get the following error in OEB check. Is there a way to resolve this?

CVC: Setting models ...
ERROR: No model match user_project_wrapper/MX0 M pfet_03v3 ad=1.3p pd=5.3u as=1.3p ps=5.3u w=2u l=0.28u
ERROR: No model match user_project_wrapper/MX1 M nfet_03v3 ad=0.61p pd=3.22u as=0.61p ps=3.22u w=1u l=0.28u
Missing models

nfet_03v3 M
pfet_03v3 M

Ahh. Currently the 3.3v models are not supported in the CVC/OEB check. If you could change them to 5.0V models, it should work (I hope).

I try to change 3.3V -> 5V. It passed! Thx!

@IMAMURA Noritsuna 先ほど、gfmpw-1でも半分はbare dieでもらうそうです。precheckさい通れば、大丈夫でしょう。

Yes! We make pads for prober on bare die!